Artiteq Solid Slider System ▪ Supports up to 20kg ▪ 10 Years Warranty
Solid Slider Steel 2mm 100cm - Maximum Load 20kg
Solid Slider hanging wires will be fitted by sliding the wires into the hanging rail via the openings at the side. Once attached to the rail system, the Solid Slider can be moved freely within the rail but cannot be removed as easily. Please note that this type of hanging wire cannot be fitted or removed when the rail system is installed from corner to corner over the whole length of the wall or ceiling. Please contact us for any further advise if necessary. Solid Slider Steel hanging wires are also available in lengths of 150, 200, 250, 300 and 500cm.
Artiteq offers a stopper system for slanted walls based on the Solid Slider. This makes it possible to use our picture hanging systems even when installed at a slope, for example in staircases.
Compatible Hooks
Steel hanging wires should be used only with self-locking hooks as the screw of manual hooks can damage the wire. Please find all suitable hooks listed below.
Self-locking Hooks
Maximum Load per Hook
Micro Grip 2mm - 20kg
Micro Grip Lock - 20kg
Ratchet Hook - 15kg
LoQQer - 15kg
Multiple Hooks/ Pictures
Multiple hooks/ pictures can be fitted to each wire as long as the maximum load of the hanging wire won’t be exceeded. Large or heavy pictures may require more than one hanging wire and hook.
Compatible Rails
Solid Slider Perlon hanging wires are suitable for all Artiteq picture hanging systems listed as follows.
Combi Rail Pro Light
Contour Rail Glued
Contour Rail
Click Rail Pro
Click Rail
Cutting Steel Wires
We disadvise to cut steel wires as the cutting point needs special treatment in advance. If no care is taken, the wire will begin to splay and it may become impossible to attach hooks. Excess wire can be simply wound up and hidden behind the picture.
