Artiteq Solid Slider 2mm Perlon 100cm

Artiteq Solid Slider System ▪ Supports up to 20kg ▪ 10 Years Warranty
 

Solid Slider Perlon 2mm 100cm - Maximum Load 20kg

Solid Slider hanging wires will be fitted by sliding the wires into the hanging rail via the openings at the side. Once attached to the rail system, the Solid Slider can be moved freely within the rail but cannot be removed as easily. Please note that this type of hanging wire cannot be fitted or removed when the rail system is installed from corner to corner over the whole length of the wall or ceiling. Please contact us for any further advise if necessary. Solid Slider Perlon hanging wires are also available in lengths of 150, 200, 250, 300 and 500cm.

Artiteq offers a stopper system for slanted walls based on the Solid Slider. This makes it possible to use our picture hanging systems even when installed at a slope, for example in staircases.

Compatible Hooks

Perlon hanging wires can be used in conjunction with both hook types: self-locking hooks and manual hooks. Please find all suitable hooks listed below.

Self-locking Hooks

Maximum Load per Hook

Micro Grip 2mm - 20kg
Micro Grip Lock - 20kg
Ratchet Hook - 15kg
LoQQer - 15kg

Manual Hooks

Maximum Load per Hook

Mini Hook - 4kg
Hook Round Brass - 5kg
Heavy Hook - 7kg
Hook Heavy Brass - 7kg
Hook Alu - 10kg

Multiple Hooks/ Pictures

Multiple hooks/ pictures can be fitted to each wire as long as the maximum load of the hanging wire won’t be exceeded. Large or heavy pictures may require more than one hanging wire and hook.

Compatible Rails

Solid Slider Perlon hanging wires are suitable for all Artiteq picture hanging systems listed as follows.

Click Rail
Click Rail Pro
Contour Rail
Contour Rail Glued
Combi Rail Pro Light

Cutting Perlon Wires

Perlon wires can be cut with a sharp retractable knife, scissors or diagonal pliers. Alternatively, excess wire can be simply wound up and hidden behind the picture.